4 Ways to Prevent Moulds From Taking Over Your Household

prevent moulds

Fungi growth is a normal course in nature but you really don’t want distinct types of fungi (like moulds) growing in your house. A huge cluster of mould isn’t just unappealing to the eyes but it also causes health problems if you’re exposed to the fungi for too long. You see, these moulds expel spores that can deteriorate your lungs and even cause allergies like eye and skin irritation. Moulds grow in locations or surfaces that have a lot of moisture. While it’s impossible to completely eradicate moisture in your house; you can still do preventive measures to stop a full mould outbreak. Follow the methods below to ensure your house won’t be enveloped by moulds.

  1. Don’t leave wet areas. Dry them as soon as you find these wet surfaces.

As what you have read earlier, moulds feed on moisture to grow. Areas in your house that are wet should be dried as soon as possible. Water spots can become a breeding ground for moulds just after 24 to 48 hours. You should keep this tip in mind at all times — especially during a basement flood. Mould growth is very common in flooded basements that haven’t been properly dried. When there is no more flood water in the basement; start drying the surfaces, walls, and ceilings. Hire services that offer dry-cleaning for basements if you want to dry the area faster.

  1. Dehumidify your bathroom

Among all the rooms and locations in your house; it’s the bathroom that always has moisture due to showers and baths. However, it’s not an excuse to leave your bathroom filled with moisture. There are many methods you can use to keep your bathroom dry. Installing an exhaust fan is one simple way to let moisture out and keep the bathroom surface dry. You can also place a dehumidifier if that’s your fancy. Place mats on the floor to prevent water from stagnating and becoming spots for moulds to grow.   

  1. Use anti-mould fixtures and materials as much as possible

If you’re planning to renovate key areas in your household or currently building a house then you might want to consider using materials that are resistant to moulds. For example: you can have drywalls that are mould-resistant instead of a typical or expensive drywall. Another good example would be to use paint that are specifically mixed to prevent mould growth. Applying these tips are very useful for areas that are more or less exposed to moisture like the bathroom, kitchen, and even the basement. Get help from the contractor who is doing the renovation or house-building to get advice on the best mould-resistant materials you can purchase.  

  1. Keep air flowing in your house

Air flow is another important thing for the prevention of mould growth. Stagnant and cold air inhibits the growth of moulds. It’s actually easy to keep air flowing in your house. Just open windows and door to circulate air all around your household. Apart from preventing mould infestations, it’s also good to breathe fresh air.

Contact Us

Book a Job Or Request For Expert Advise

Location