Actions You Should Do In the Event of a Plumbing Emergency
Plumbing emergencies can happen to anyone. Even though you have properly maintained your fixtures and plumbing system, problems still occur. One of the most common reactions people do in the event of a plumbing emergency is panicking. You should always stay calm no matter how massive the damage is. Being calm and logical will help you determine the next course of action much faster. Check out the tips on what you should do in case you’re faced with a plumbing emergency.
Turn Off the Main Water Valve
In most plumbing emergencies, the main problem is leakage. The first thing you need to do is rush to where the main water valve is located and turn it off. With this, you will be able to hinder the water supply coming to your house and lessen the amount of water bursting out of the leakage. Once you’re done shutting the main valve, call the best and most reputable local plumber immediately. You should really know where the main valve is located or else, you won’t be able to do anything to minimise the devastation. Contact your plumber or water provider if you have trouble finding the valve.
When it comes to toilet overflow, you don’t have to turn the main valve off since you can just shut down the toilet water valve. In most cases, the valve can be found between the toilet tank and the floor. Another useful tip is that when you notice that the toilet is overflowing, you shouldn’t attempt to flush it again. It could be a stubborn clog that’s stopping the toilet from flushing properly. Draining down additional water will just add to the overflow. In other cases, the cause of the overflow might be from a damaged component of the toilet. Pinpointing the exact cause of the faulty toilet can be difficult so it’s much better if you would just let a plumber do the inspection.
Water Heater Emergencies
Whether your water heater has extremely loud noises or water leaks, these emergency reactions will prove useful. Standard operating procedures would be to turn off the the electricity or gas. In most gas water heater units, twist the dial above the thermostat to ‘off’. For electric types, the circuit breaker lever should be ‘off’. Next step would be to shut down the water supply of the water heater. If the water still continues to leak, you need to turn off the main valve. After that, drain the water heater by plugging a hose into the drain valve. Run the other end part of the hose. Please be sure that the spot you’re dumping the water with isn’t prone to hot water damage and rusting. Lastly, open the relief valve.
Extremely Hot Water
It’s great to have a warm bath at the end of the day to relax, but if you noticed that the water from the shower or faucets is extremely hot then you have a plumbing emergency. The cause of scalding hot water is that your water heater has overheated. You can turn on the hot water faucets and showers to drain out all the hot water, but you need to be sure you can safely do this. Also, before attempting this solution please turn off the water heater first.